BayMeters
Supmea A100 Remote Clamp Electromagnetic Flowmeter
Supmea A100 Remote Clamp Electromagnetic Flowmeter
ASME BPE Tri-Clamp connections also available. Contact us for details and pricing.
Lead Time: 4 Weeks Or More
Datasheet User ManualCouldn't load pickup availability
Share
Technical Specifications
| Measured Media | Conductive Liquids (≥50 μS/cm) |
| Pipe Size | DN10–DN1000 (3/8"–40") |
| Flow Velocity | 1.6–16.4 ft/s (0.5–5 m/s Recommended) |
| Accuracy | ±0.5% of Reading (Standard), ±0.3% Optional |
| Repeatability | 0.16% |
| Rangeability | 10:1 |
| Medium Temperature | CR: 14–158°F PU: 14–140°F PTFE/FEP: 14–248°F |
| Outputs | 4–20 mA, Pulse Output, RS485 Modbus RTU, Optional HART |
| Power Supply | 100–240 VAC or 20–28 VDC |
| Power Consumption | ≤15 W |
| Process connection | ISO 2852 Clamp |
| Pressure Rating | PN16 |
| Relay Output | Dual SPST Relay (Optional) |
Downloads
FAQ
What liquids can the LDG-SUP-A100 measure?
The flowmeter measures electrically conductive liquids with a minimum conductivity of 50 μS/cm, including water, wastewater, acids, alkalis, slurries, and many chemical solutions. It is not suitable for oils, gases, or steam.
Where is the transmitter mounted?
The transmitter is mounted separately from the flow sensor and connected by a signal cable. This lets you place the display where it is easier to read and operate.
Does the flowmeter cause pressure loss?
No. Because the measuring tube has no moving parts or flow obstructions, the electromagnetic flowmeter introduces virtually no pressure loss into the pipeline.
Can it measure flow in both directions?
Yes. The LDG-SUP-A100 supports bi-directional flow measurement and can display and output both forward and reverse flow values.
What warranty do you provide?
Please refer to BayMeters Warranty Policy or contact our sales team for warranty details.
Do you provide technical support?
Yes. BayMeters provides technical support for product selection, installation, configuration, and troubleshooting. If you need assistance, please contact our technical support team.

- Overview
- Features
- Applications
- Specifications
- Downloads
- FAQ
Product Overview
The Supmea A100 Remote Clamp Mag Flow Meter uses electromagnetic induction to measure conductive liquids. Its clamp connections allow easy removal for inspection or maintenance, and the separately mounted transmitter displays flow rate and total volume where operators can easily read them. The meter supports bidirectional flow measurement in water treatment and industrial process lines.
Key Features
- Provides ±0.5% of reading as standard, with selected pipe sizes available at ±0.3% accuracy for demanding process applications.
- The full-bore electromagnetic measuring principle eliminates mechanical wear, reducing maintenance while ensuring long-term measurement stability.
- The unobstructed measuring tube introduces virtually no pressure drop, making it ideal for continuous process monitoring.
- Accurately measures both forward and reverse flow without requiring additional hardware or configuration changes.
- Supports 4–20 mA, Pulse Output, RS485 Modbus RTU, and optional HART communication for seamless integration into PLC, DCS, and SCADA systems.
- The remote transmitter keeps the display accessible, and clamp connections simplify meter removal for inspection or maintenance.
Applications